How to install the MN MODEL MN82pro RC CAR differential?

Want to buy MN MODEL MN82pro RC CAR original parts can click here

Use tools to smoothly press the new ball bearings into the corresponding positions of the differential housing on the press. Ensure that the bearings are installed stably and durable.
Align the odometer driving gear with the positioning hole on the differential housing, and then press it in with force and smoothly. Ensure that the gears are installed firmly and accurately positioned.
Install the rubber gasket into the differential housing to provide the necessary support and seal for subsequent assembly.
Use tools to flip the differential housing, and then install the lower gear (axle gear set) to the differential housing. Ensure that the gears are installed in place and rotate smoothly.
Install the planetary gear set accurately into the differential housing, ensuring that the meshing clearance between the planetary gears and the side gear sets is correct and the holes are aligned.
Gently turn the planetary gears to ensure that they can rotate smoothly and mesh properly with other gears.
Insert the planetary gear shaft into the positioning hole in the differential housing, ensuring that the shaft can be firmly positioned in the hole and support the rotation of the planetary gear set.
Use wire clamps to fix the planetary gear shaft to the differential housing, ensuring that all connections are firm and will not loosen.
After completing the installation, carefully check whether the various components of the differential are installed correctly and firmly.
Gently turn the differential to check whether the meshing between the planetary gear set and the side gear set is good, and whether there is any abnormal noise or sticking.
If necessary, make necessary adjustments to ensure the normal operation of the differential.