How to install the MN MODEL MN128 RC CAR differential?

Prepare the required tools and new differential components; first remove the old differential according to the disassembly steps.

1. Use precise tools to install brand new ball bearings on the press to ensure that the bearings are stable and durable.
2. After aligning the positioning holes, press the odometer driving gear with force and stability.
3. Install the rubber gasket in the differential case to provide support for subsequent assembly.
4. Turn the differential case over, install the lower gear in place, and then gently support the upper gear with your hand.
5. Accurately install the planetary gear into the housing, ensuring that the rotating gear set is aligned with the hole.
6. Firmly position the planetary gear shaft in the positioning hole to maintain the stability of the overall structure.
7. Ensure that all connection parts are stable and install wire clamps to fix the differential assembly.