How to install the MN MODEL MN82S RC CAR differential?

Install the bearing: Use a press tool to smoothly press the new MN MODEL MN82S RC CAR ball bearing onto the differential housing. Make sure the bearing is installed correctly and firmly.
Install the odometer driving gear: After aligning the odometer driving gear with the positioning hole, press it firmly and steadily. Make sure the gear is installed in place and not loose.
Install the rubber gasket: Install the rubber gasket in the MN MODEL MN82S RC CAR differential housing to provide necessary support for subsequent assembly.
Install the half-shaft gear: Install the MN MODEL MN82S RC CAR two half-shaft gear (or related components) adjustment gaskets on the half-shaft gear, and then install them into the differential housing. Make sure the meshing between the gears is correct and tight.
Install the planetary gear: Assemble the MN MODEL MN82S RC CAR planetary gear into the housing, support the housing and rotate the gear set to align its holes. Make sure the planetary gear can rotate smoothly.
Install the planetary gear shaft: Position the MN MODEL MN82S RC CAR planetary gear shaft firmly in the positioning hole to maintain the stability of the overall structure.
Install other accessories: Install other necessary accessories such as wire clips, seals, etc. according to the MN MODEL MN82S RC CAR manual or differential installation guide.