MN Model MN168 1/12 2.4Ghz 4WD RC Car RTR. MN-RC MN168 RC climbing rock crawler is brushed motor.You need to buy this MN MODEL MN168 RC CAR (click here).

Product configuration of MN MODEL MN168:

1. Remote control * 1 (excluding batteries, need to be purchased separately)
2. Original vehicle battery * 1
3. USB charging cable * 1
4. Accessory package * 1

Product functions of MN-RC MN168 rc car:

Product description

Car model: MN MODEL MN-168
Product battery: 7.4V 1200ma

Remote control battery: 2*”AA” (remote control does not have battery, need to be purchased separately)
Charging: USB charging cable (charge safely)
Applicable people: teenagers (7-14 years old) and above, children’s toys or adults’ hobbies
Car speed: 7.2 (km/h), actual speed may be affected by many factors
Remote control time: 30-40 (minutes)

Charging time: 180 (minutes)
Remote control distance: 100 (meters)
Original motor: 280 strong magnetic motor
Original servo: 17g bridge servo
Is there a protection function: Yes

Is it waterproof: It is not waterproof under normal circumstances, and it should be avoided as much as possible to ensure the normal use and life of the vehicle.

Product name: MN MODEL MN-168 4WD remote control model car 1:12
Product material: nylon/metal
Product color: yellow, light blue, (dark blue to be produced)

Single weight (including battery) kg: 1.15
Single packaging weight (including color box) kg: 1.85
7.4V 1200mah weight (g): 75

Gross weight/net weight (kg): 18.6/16.6
Product specifications (cm): 381717
Color box specifications (cm): 462225
Box specifications (cm): 66.54777
Packing quantity (pcs): 9

1: Charging protection; It is recommended to use the original charger; Check the quality of the charger before charging; Control the charging environment to keep the temperature suitable and keep it dry; Grasp the charging time, avoid high charging, and do not discharge deeply; Pay attention to the charging status and the charging indicator during charging; Check the battery regularly and store the battery correctly.

2: Low voltage protection: When the battery level of the receiver is lower than 6.5V, the receiver will automatically stop working; use and maintain correctly, and check regularly.

3: High temperature protection: When the operating temperature of the receiver is higher than the setting, the receiver will protect the drive control circuit; correctly assist in heat dissipation, and resume working after the temperature returns to normal.

MN MODEL MN168 model appearance and interior introduction

MN MODEL MN168 is a 1:12 scale climbing car model.

Overall body shape: simulates the real car model, hard shell body, smooth lines, high appearance restoration, such as the hard lines of the body, the shape of the windows, the curvature of the roof, etc. are well reflected.

Shell color: There are a variety of colors such as yellow and blue to choose from, which can meet the personalized needs of different consumers and have better visual effects.

Appearance details: The air intake grille and headlights on the front face are more finely portrayed, and the front and rear controllable headlights, linkage light groups, door handles, door switches, wipers, metal car logos and other details are all available, super soft anti-skid tires and anti-skid nuts, etc., and the real car rearview mirror uses reflective parts to increase the sense of simulation.

Chassis structure: sturdy and durable, able to withstand greater impact.

Independent suspension system: Both the front and rear axles use independent suspension systems. This suspension system can effectively reduce body vibration, improve the stability and passability of the vehicle, and make the remote control car more stable during driving.

Vehicle size: The vehicle is about 37 cm long, 16.5 cm wide and 17 cm high.

Other accessories (need to be purchased separately): luggage rack, bumper and other accessories.

MN MODEL MN168 interior overall design: refer to the real car interior, restore in place, beautiful.

Interior material: limited by price factors, the interior has no detailed painting.
Doors: The doors can be opened and closed manually.

Seats: The shape and proportion of the seats are modeled after the real car design, with a certain three-dimensional sense. The color of the seats usually matches the color of the body, maintaining the consistency of the interior style of the whole vehicle.

Hood: The hood can be opened to facilitate battery replacement. (Be careful when replacing the battery)
Trunk: The trunk cannot be opened. (Don’t break it)

Steering wheel: The shape of the steering wheel is more realistic, and the size is appropriate, which can make players feel like driving a real car when operating the remote control car. The steering wheel has a certain linkage with the front wheel. When the player controls the steering of the vehicle through the remote control, the steering wheel will also turn, which increases the fun and realism of the operation.

Dashboard: There are some simple scales and pointers on the dashboard, but there is no digital display. This design makes the interior look more realistic, as if it is really a scaled-down version of the car interior.

Center console: There are some buttons and knobs on the center console, which simulate the general shape and layout of the center console of a real car, but cannot realize the actual functions.

Interior space layout: The interior space layout is relatively reasonable, which can give people a relatively complete interior feeling.

The bottom parts of MN MODEL MN168 mainly include the following parts:
Chassis material: The chassis is mainly made of plastic material, because plastic has certain toughness and strength, which can provide basic support and protection for the vehicle. In normal remote control operation and light off-road scenes, the chassis can maintain good stability and is not prone to serious deformation or damage.

Layout design: The layout of the chassis is relatively reasonable, and the installation positions of various components are carefully designed to ensure that the center of gravity of the vehicle is evenly distributed. This design helps to improve the stability of the vehicle during driving, especially when climbing steep slopes or passing through rugged roads, which can reduce the risk of rollover.

Structural design: frame structure and suspension connection points.
Transmission system related parts: drive shaft, gear, suspension arm, shock absorber.
Electronic equipment protection parts: protective shell, cable and wiring harness.

The characteristics of the MN MODEL MN168 wheel are:

the tire material is rubber tire; the tire pattern is designed to be deep; the wheel hub structure uses a solid plastic wheel hub; the size is also moderate, which allows players to easily control the vehicle.

The sealed tire prevents water/sand from entering the tire and causing maintenance troubles. With the anti-loosening nut, the tire will not fall off.

The tire of MN MODEL MN168 is mainly composed of inner hub cover, inner pressure ring, support sponge, super soft tire skin, and outer hub cover.

The functions of metal adjustable shock absorbers:

buffer vibrations, reduce noise, control and maintain tire contact with the ground, stabilize vehicle body posture, prevent vehicle from losing control, and protect vehicle components.

Four features of MNMODEL MN168 remote control car:

1. The features of the MN168 tire lock wheel hub are: anti-slip design, the material structure of the tire is solid, it can better match the tire, convenient tire disassembly and maintenance, and the appearance of the tire is highly simulated.
2. The features of independent reception/electronic adjustment: stable signal reception, good upgrade compatibility, strong scalability; precise speed control, efficient energy conversion and overheating protection function.
3. The features of hydraulic shock absorbers: excellent buffering performance can enhance driving comfort; strong adjustability, adjustable hardness; high reliability, solid structure, good sealing performance; can improve the vehicle’s handling performance, stabilize the body posture and enhance tire grip.
4. The features of the new door bridge: can improve passability, increase ground clearance, improve approach angle and departure angle; enhance suspension performance, more flexible suspension travel and better suspension support; optimize steering performance, reduce steering radius and improve steering accuracy; improve simulation, more realistic appearance and closer function to real car.

Features and usage of the remote control of MN MODEL MN168：

The remote control has rich functions: Multi-directional control: allows the vehicle to achieve basic operations such as forward, backward, left turn, right turn, etc., allowing players to fully control the driving direction of the remote control car and drive flexibly in various scenarios; Proportional remote control: can accurately control the speed and steering angle of the vehicle, with higher control accuracy than ordinary remote control car remote controls; Lighting control: has remote control car lighting control function, including the switch of headlights, turn signals, and reversing lights; Two-speed shifting: has two-speed shifting function, and can switch the speed gear of the vehicle according to different driving needs.

Remote control shape: It is a gun-style design, which is ergonomic and convenient for players to hold and operate; the buttons on the remote control are sensitive, and the buttons on the remote control are sensitive, and the corresponding functions can be triggered by pressing lightly; the signal is stable, using high-quality wireless signal transmission technology, the signal transmission is stable, and the remote control distance is far. And it is very convenient to operate and can provide good feel and stability during operation.

Buttons and joysticks: There are multiple buttons and one or two joysticks on the remote control. The buttons are mainly used for the operation of some special functions, such as turning on and off the lights, switching speed modes, etc.; the joystick is the main component for controlling the direction and speed of the vehicle. By pushing the joystick in different directions and amplitudes, the vehicle can be accurately controlled to move forward, backward, turn left, turn right, and speed.

Power switch: used to turn on and off the power of the remote control, usually located on the side or top of the remote control for easy operation.

The functions of the MN168 remote control include: light control, direction control, speed control and function mode switching.

MN168 Crossing Edition comes with: luggage rack/simulated ladder/escape board/protective bar and other equipment (need to be purchased separately)

When you install additional parts of MN MODEL MN168, it is recommended that you read the product manual carefully and follow the steps in the manual. If you are not sure how to install a certain part, it is recommended that you consult a professional or contact after-sales.

The MN MODEL MN168 remote control car has a variety of ways to play. It can be paired with MN MODEL related outdoor simulation equipment for crossing upgrades (luggage racks and outdoor equipment need to be purchased separately). The following picture shows the player’s modification effect and equipment recommendations.

MN MODEL MN168 remote control car is an excellent remote control car that combines stunning appearance, powerful performance, excellent structure and rich player experience. It has unique charm and excellent quality, and has become the only choice for both remote control car novices and remote control car enthusiasts. If you haven’t found a remote control car that can bring you unlimited fun, then MN MODEL MN168 must be a high-quality remote control car worth your possession.